Instrument Panel Pad - Removal

REMOVAL
1. Remove A-pillar trim. Using a trim stick C-4755 or equivalent, gently pry out and remove. Refer to Trim Panel.





2. Using a trim stick C-4755 or equivalent, disengage clips holding speaker grille (1) to instrument panel.





3. Remove defroster grille (1).

4. Using a trim stick C-4755 or equivalent, remove passenger bezel.





5. Remove five top pad fasteners. Three fence fasteners and two located under passenger bezel.


NOTE: The Instrument Panel Top pad may be hard to unsnap from the instrument panel. Be sure not to mar, scuff, or damage the instrument panel pad.

6. Pull top cover rearward to disengage hooks holding front of top cover to instrument panel.

7. Remove top cover from vehicle.

8. Remove airbag from top cover if necessary.