Installation

INSTALLATION




1. Place hinge in the marked outline of hinge on quarter panel trough and inside of decklid (1) to aid in positioning hinge.

2. Install hinge to vehicle.

3. Install bolts (2) attaching hinge to quarter panel trough.

4. Tighten bolts to 8 Nm (6 ft. lbs.) torque.

5. Place decklid (1) against padded block and hold it steady.

6. Install bolts attaching hinge to decklid.

7. Tighten bolts to 23 Nm (17 ft. lbs.) torque.

8. Install prop-rod to mounting studs.

9. Install the gas prop-rod lock caps.

10. Remove the padded block between the deck panel and the decklid.

11. Close decklid.