Description - Front

DESCRIPTION





A blower motor resistor is used on vehicles equipped with the front manual temperature control (MTC) heating-A/C system. Vehicles equipped with the automatic temperature control (ATC) heating-A/C system use a blower motor power module, instead of the blower motor resistor.

The front blower motor resistor is mounted to the rear of the front HVAC housing, directly behind the glove box. The front blower motor resistor consists of a mounting plate (1) with wire connector terminals and coiled resistor wires (2) surrounded by a metal heat sink.

The front blower motor resistor is accessed for service by removing the glove box.