Instrument Panel Air Outlets
INSTRUMENT PANEL AIR OUTLETS
NOTE: Passenger side air outlet shown. Driver side outlet similar.
1. Position the instrument panel air outlet (1) into opening in the instrument panel.
2. Install the two screws (2) that secure the instrument panel air outlet to the instrument panel. Tighten the screws to 2 Nm (17 in. lbs.).
3. Install the instrument panel end cap.
4. If servicing the left instrument panel air outlet, install the instrument panel cluster bezel. If servicing the right instrument panel air outlet, install the right trim panel firmly and evenly onto the instrument panel until the retaining tabs are fully engaged.