Installation - Front

INSTALLATION - FRONT

1. Position the torca clamp on the catalytic converter.
2. Install the muffler into the catalytic converter until the guide pin on the converter seats into the slot on the muffler.
3. Install the outlet pipe of the muffler into the inlet pipe of the resonator/muffler assembly with 44.95mm (1.77 in.) of insertion.
4. Tighten torca clamp nut to 54 Nm (40 ft. lbs.).
5. Install the resonator/muffler assembly.
6. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.
7. Check the exhaust system for contact with the body panels. Make the necessary adjustments, if needed.