Installation - Right Exhaust Manifold

INSTALLATION - RIGHT EXHAUST MANIFOLD
1. Clean gasket surfaces.
2. Position the exhaust manifold and gasket. Install the retaining bolts. Tighten bolts starting at the center working outward to 23 N.m (200 in. lbs.).
3. Install exhaust system. Connect the exhaust system hangers from the pipe assembly and install the three exhaust manifold flange retaining bolts. Tighten the bolts to 30 N.m (22 ft. lbs.).
4. Connect the downstream oxygen sensor electrical connector.
5. Install the EGR tube retaining bracket.
6. Lower vehicle.
7. Install the exhaust manifold crossover pipe retaining bolts. Tighten bolts to 31 N.m (275 in. lbs.).
8. Connect the upstream oxygen sensor electrical connector.
9. Connect the negative battery cable.