Rear Door

SPEAKER

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Fold down the rear seat backs.
3. Remove C-pillar trim.
4. Remove lower quarter trim behind rear seat backs.
5. Remove fasteners from rear shelf trim. Pull out trim to access speaker.
6. Remove speaker screws.
7. Disconnect wire harness connector.

Rear Speaker-JR41:

8. Remove speaker.

INSTALLATION
1. Connect wire harness connector to speaker.
2. Position speaker into opening.
3. Install speaker screws.
4. Install rear shelf trim.
5. Install lower quarter trim panel.
6. Install C-pillar trim.
7. Raise seat backs.
8. Connect battery negative cable.