Removal and Installation

REMOVAL
1. Remove adjuster knob and turning loop cover.
2. Remove bolt attaching turning loop to belt height adjuster.
3. Remove upper B-pillar trim panel.
4. Remove bolt attaching seat belt height adjuster to B-pillar.
5. Remove seat belt height adjuster from vehicle.

INSTALLATION
1. Place seat belt height adjuster into position.
2. Install two bolts attaching seat belt height adjuster to B-pillar. Torque bolts to 40 ± 8 N.m (29.5 ± 6 ft. lbs.).
3. Install upper B-pillar trim panel.
4. Install the bolt attaching the turning loop to the height adjuster. Torque bolt to 40 ± 8 N.m (29.5 ± 6 ft. lbs.).
5. Install turning loop cover and adjuster knob.