Coolant Reservoir: Service and Repair

COOLANT PRESSURE CONTAINER

REMOVAL
1. Drain coolant below the coolant pressure container level.
2. Remove the power steering reservoir attaching screw.
3. Remove the air conditioning receiver/dryer attaching screw.
4. Unsnap washer hose from the bottle.
5. Disconnect the hose from coolant outlet connector to the bottle.
6. Remove pressure container attaching screws.
7. Reposition pressure container and disconnect the heater hose at the container.
8. Remove coolant pressure container.

INSTALLATION
1. Connect heater hose to coolant pressure container.
2. Install container in mounting position and install attaching screws.
3. Connect the coolant outlet connector hose to the bottle.
4. Snap washer hose into groove on coolant pressure container.
5. Install the air conditioning receiver/dryer attaching screw.
6. Install the power steering reservoir attaching screw.
7. Fill cooling system.