Air Injection Flow Sensor: Service and Repair
REMOVAL1. Disconnect negative battery cable.
2. Remove the air pump assembly.
Mounting Bracket Bolts:
3. Remove 2 bracket mounting bolts.
Remove/Install Assembly:
4. Remove the bracket assembly.
Mass Air Flow Sensor:
5. Disconnect the electrical connector to MAF.
Removing Sensor From Bracket:
6. Twist the MAF sideways and remove from bracket.
7. Remove the rubber mounting.
INSTALLATION
1. Install the rubber mounting to MAF sensor.
Removing Sensor From Bracket:
2. Twist the MAF sideways and install to bracket.
Mass Air Flow Sensor:
3. Connect the electrical connector to MAF.
Remove/Install Assembly:
4. Install the bracket assembly.
Mounting Bracket Bolts:
5. Install 2 bracket mounting bolts.
6. Install the air pump assembly.
7. Connect negative battery cable.