Left Lower Instrument Panel Trim Replacement

LEFT LOWER INSTRUMENT PANEL TRIM

REMOVAL
1. Using a trim stick (special tool #C-4755) or equivalent, gently pry out on the left instrument panel end cover and remove from vehicle.
2. Using a trim stick or equivalent, gently pry out on the power mirror switch bezel, disconnect the switch connector and remove.
3. Remove the five screws to the left lower instrument panel trim, Disengage one wiring connector to deck lid release and remove bezel from vehicle.

INSTALLATION
1. Connect the deck lid release switch connector.
2. Position the left lower instrument panel trim over the retaining slots and firmly push into place.
3. Install the five screws to the left lower instrument panel trim.
4. Connect the power mirror switch connector and position the bezel over the retaining slots and firmly snap into place.
5. Position the left instrument panel end cover over the retaining slots and firmly snap into place.