Air Cleaner Housing: Service and Repair

AIR CLEANER HOUSING

REMOVAL - UPPER





1. Remove the front engine cover (1).





2. Remove the upper air cleaner housing retaining screws (1).
3. Disconnect the breather hose (2) from the throttle body inlet tube.
4. Disconnect the air inlet tube from the throttle body.
5. Remove the upper air cleaner housings from the engine.

REMOVAL - LOWER





1. Remove the front engine cover (1).





2. Remove the upper air cleaner housing retaining screws (1).
3. Disconnect the breather hose (2) from the throttle body inlet tube.
4. Disconnect the air inlet tube from the throttle body.
5. Remove the upper air cleaner housings from the engine.





6. Lift and remove the lower air cleaner housing.

INSTALLATION - UPPER





1. Install the upper air cleaner housings to the engine.
2. Connect the air inlet to the throttle body.
3. Connect the breather hose (2) to the throttle body inlet tube.
4. Install the upper air cleaner housing retaining screws (1) and tighten them to Nm.





5. Install the front engine cover (1).

INSTALLATION - LOWER





1. Install the lower air cleaner housing.





2. Install the upper air cleaner housings to the engine.
3. Connect the air inlet to the throttle body.
4. Connect the breather hose (2) to the throttle body inlet tube.
5. Install the upper air cleaner housing retaining screws (1) and tighten them to Nm.





6. Install the front engine cover (1).