Procedures

REMOVAL
1. Disconnect and isolate the battery negative cable.

Sunroof Switch Location:

2. Using a suitable flat bladed tool separate the sunroof switch from the headliner, by carefully pulling down on the sides of the switch bezel, to release the retaining clips.
3. Disconnect the switch electrical connector and remove the switch from the vehicle.

INSTALLATION
1. Position the sunroof switch in the vehicle.

Sunroof Switch Retaining Clips:

2. Connect the switch electrical connector to the connector receptacle.
3. Position the sunroof switch against the headliner and push the switch to properly seat the retaining clips.
4. Connect the battery negative cable.
5. Confirm proper sunroof system operation.