Clutch Release Fork: Testing and Inspection

CLUTCH RELEASE BEARING

CAUTION: Release bearing is packed with grease. Therefore, do not wash it in a cleaning solvent.

1. Check for seizure, damage, noise or improper rotation.
2. Check for wear on the surface which contacts with the diaphragm spring.
3. Check for wear on the surface which contacts with the release fork. If abnormally worn, replace.

RELEASE FORK
If the surface which contacts with the bearing is abnormally worn, replace.

RELEASE FORK SHAFT <3.0L ENGINE>
Check the release fork shaft for bend and wear, and replace if necessary.