FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2005 >> Sebring Coupe V6-3.0L VIN H >> Repair and Diagnosis >> Transmission and Drivetrain >> Clutch >> Clutch Hydraulic System >> Clutch Master Cylinder >> Service and Repair >> Removal and Installation

Removal and Installation

REMOVAL AND INSTALLATION





REMOVAL SERVICE POINT
<> CLUTCH HOSE REMOVAL





Holding the nut at the clutch hose side, loosen the flare nut on the clutch tube.

INSTALLATION SERVICE POINT
>>A<< CLUTCH HOSE/CLUTCH TUBE





1. Temporarily tighten the clutch tube flare nut by hand, and then tighten it to the specified torque, being careful that the clutch hose does not become twisted.
2. After tightening the clutch tube flare nut, check to be sure there is no leakage of the clutch fluid.
pro multis Credits:Operation CHARM About Operation CHARM