Mechanical Specifications

ITEM SPECIFICATION
Emission control system
EGR valve bolt <2.4L ENGINE> 19 ±3 N-m (14 ± 2ft-lb)
EGR valve bolt <3.0L ENGINE> 22 ±4 N-m(16 ± 3ft-lb)
Catalytic converter
Exhaust fitting stay (LH)
M8 12 ±2 N-m (107 ± 17 in-lb)
M12 32± N-m (24 ± 5ft-lb)
Exhaust fitting stay (RH)
M8 12 ± N-m (107 ± 17 in-lb)
M12 32± N-m (24 ± 5ft-lb)
Warm up three way catalytic converter (LH) nut 35 ± 4 N-m (26 ± 3ft-lb)
Warm up three way catalytic converter (RH) nut 35 ± 4 N-m (26 ± 3ft-lb)
Front exhaust pipe nut <2.4L ENGINE> 49 ± 10 N-m (37 ± 7 ft-lb)
Front exhaust pipe to center exhaust pipe nut 59 ± 10 N-m (44 ± 7 ft-lb)
Front exhaust pipe to warm up three way catalytic converter nut <3.0L ENGINE> 49 ± 9 N-m (37 ± 6 ft-lb)
Hanger bolt 12 ± 2 N-m (107 ± 17 in-lb)
Heated oxygen sensor (rear) 54 ± 5 N-m (40 ± 4 ft-lb)
Left bank heated oxygen sensor (rear) 54 ± 5 N-m (40 ± 4 ft-lb)
Right bank heated oxygen sensor (front) 54 ± 5 N-m (40 ± 4 ft-lb)
Right bank heated oxygen sensor (rear) 54 ± 5 N-m (40 ± 4 ft-lb)