Fuel Tank Vent: Service and Repair

REMOVAL
1. Perform fuel system pressure release.
2. Disconnect negative cable from battery.
3. Drain fuel tank.
4. Raise and support vehicle on host.
5. Lower fuel tank, refer to Fuel Tank Removal/ Installation.
6. Remove vent hose from top of tank.
7. Remove vent hose from fuel filler neck.

INSTALLATION
1. Install vent hose and tighten clamp.
2. Install fuel tank, refer to Fuel Tank Removal/ Installation.
3. Install vent hose to fuel filler neck and tighten clamp.
4. Lower vehicle.
5. Fill fuel tank and check for leaks.
6. Connect negative cable to battery.