Crankshaft Main Bearing: Specifications

Crankshaft Main Bearing Cap
Tie Bolts 28 Nm (250 inch lbs.)
Outer Cap Bolts 27 +1/4 Turn Nm (20 +1/4 Turn ft. lbs.)
Inner Cap Bolts 20 +1/4 Turn Nm (15 +1/4 Turn ft. lbs.)

CRANKSHAFT MAIN BEARING JOURNALS
Diameter 63.49-63.51 mm (2.4997-2.5004 in.)
Bearing Clearance 0.035-0.053 mm (0.0014-0.0021 in.)
Bearing Clearance (Max.) 0.087 mm (0.0034 in.)
Out of Round (Max.) 0.015 mm (0.0006 in.)
Taper (Max.) 0.015 mm (0.0006 in.)
End Play 0.0475-0.2725 mm (0.0019-0.0108 in.)
End Play (Max.) 0.43 mm (0.017 in.)