Child Tether Upper Cover

REMOVAL
1. Open the Child Tether Cup Cover to the full open position.

2. Put one hand underneath the shelf trim panel to catch the push fastener, then grasp the tether anchor cover with the other hand and pull up and forward, snapping the pivot pin and retainer.

NOTE: The cover is not reusable. If removed, a new one must be reinstalled. There should be no reason to reuse an old one as a new shelf panel will come with a new cover plate on it.

INSTALLATION

NOTE: The cover is not reusable. If removed, a new one must be reinstalled. There should be no reason to reuse an old one as a new shelf panel will come with a new cover plate on it.

1. Place the Child Tether Cup cover into position on top of the rear shelf trim panel.
2. Place the push fastener on the underside of shelf trim panel on the pivot pin and push together.