Headlamp Bulb: Service and Repair

REMOVAL

CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.

1. Disconnect and isolate battery negative cable.
2. Remove headlamp unit retaining screws.
3. Remove headlamp unit to expose back of unit.
4. Disconnect wire connector from back of headlamp bulb.
5. Rotate retaining ring counterclockwise.
6. Remove retaining ring.
7. Pull headlamp bulb and remove from headlamp unit.

INSTALLATION
1. Install headlamp bulb to the headlamp unit.
2. Install headlamp bulb retaining ring.
3. Rotate retaining ring clockwise.
4. Connect wire connector to bulb.
5. Install the headlamp unit.
6. Install headlamp unit retaining screws.
7. Connect the battery negative cable.