Front Mount
FRONT MOUNTREMOVAL
1. Raise vehicle.
2. Remove front mount to bracket horizontal through bolt (Fig. 80).
3. Remove the AIR pump.
4. Loosen the rear mount through bolt.
5. Remove front mount vertical bolts (Fig. 80).
6. Remove front mount.
INSTALLATION
1. Position front mount on lower radiator crossmember.
2. Loose install front mount to bracket through bolt.
3. Install front mount vertical bolts. Tighten bolts to 61 Nm (45 ft. lbs.) (Fig. 80).
NOTE: Be sure the weight of the engine is static and in rest position.
4. Tighten rear horizontal through bolt to 75 Nm (55 ft. lbs.) (Fig. 78).
5. Install the AIR pump.
6. Tighten front horizontal through bolt to 75 Nm (55 ft. lbs.) (Fig. 80)
7. Lower vehicle.