Hood Stop: Service and Repair

ADJUSTER BUMPER

REMOVAL

1. Release hood latch and open hood.
2. Rotate hood adjuster bumper counterclockwise.

Fig. 1:

3. Remove hood adjuster bumper from headlamp reinforcement (Fig. 1).

INSTALLATION

Fig. 2:

1. Ensure that hood overslam bumpers proper position (Fig. 2).
2. Start hood adjuster bumper into headlamp reinforcement (Fig. 1).
3. Rotate hood adjuster bumper clockwise. Adjust hood adjuster bumper to achieve a hood height that is flush across the top surfaces along fenders.
4. Close hood.