Roadster

REMOVAL




1. Turn the ignition on.
2. Raise the Spoiler (1) to the fully extended position.
3. Turn the ignition off.
4. Disconnect the negative battery cable.




5. Remove the decklid interior trim panel.
6. Remove the retaining screws, and remove the support bracket (1) from the decklid.




7. Disconnect the Center High Mounted Stop Lamp (CHMSL) harness connector (1).
8. Remove the attaching screws (2) for the Center High Mounted Stop Lamp (CHMSL) harness connector (1).
9. Remove the Center High Mounted Stop Lamp (CHMSL) from the vehicle.

INSTALLATION




1. Insert the Center High Mounted Stop Lamp (CHMSL) assembly into the decklid, install the retaining screws (2) and tighten.
2. Connect the CHMSL harness connector (1).




3. Install the support bracket to the decklid (1).
4. Install the decklid interior trim panel.
5. Connect the negative battery cable.