Coupe

REMOVAL




1. Disconnect the negative battery cable.
2. Remove the liftgate interior trim panel.
3. Remove the retaining screws (2) from the liftgate.
4. Disconnect the Center High Mounted Stop Lamp (CHMSL) harness connector (3).
5. Slide the CHMSL assembly (1) outward and remove from the liftgate.

INSTALLATION




1. Insert the Center High Mounted Stop Lamp (CHMSL) assembly into the liftgate, install the retaining screws and tighten.
2. Connect the CHMSL harness connector.
3. Install the liftgate interior trim panel.
4. Connect the negative battery cable.