Rear Brake Hose - Removal and Installation

STANDARD PROCEDURE

REMOVAL

REAR BRAKE HOSE

CAUTION: Do not spill brake fluid on any painted surface. Brake fluid can damage paint.





1. Raise and support the vehicle.
2. Remove the wheel and tire assembly
3. Disconnect the brake hose (1) from the brake line connection.





4. Disconnect the brake hose at the caliper (1) and remove the hose.

INSTALLATION - REAR BRAKE HOSE





1. Connect the brake hose (1) to the brake line connection.





2. Route the brake hose (1) behind the rear shock (2) and connect to the caliper (3).
3. Install the wheel and tire assembly.
4. Lower the vehicle.
5. Fill and bleed the brake system.
^ Manual bleeding:
^ Pressure bleeding: