Rear Riser Motor

REMOVAL




1. Remove the front seat.

NOTE: Only disconnect the harness connector for the defective motor.

2. Disconnect the rear riser motor harness connector (7).




3. Remove the rear riser motor rear attachment bolt (1).




4. Remove rear riser motor front attachment bolt (1).
5. Remove the rear riser motor.

INSTALLATION




1. Position the rear riser motor between the front and rear attachment brackets.
2. Install the rear riser motor rear attachment bolt (1). Tighten the motor bolt to 4 N.m (35 in. lbs.).




3. Install the rear riser motor front attachment bolt (1). Tighten the bolt to 4 N.m (35 in. lbs.).
4. Connect the rear riser motor harness connector.

NOTE: Insure the harness is routed and secured in its original position to avoid potential interference with moving parts.

5. Install the front seat.
6. Connect the negative battery cable.