Front Riser Motor

REMOVAL




1. Remove the front seat.
2. Disconnect the front riser motor harness connector (2).




3. Remove the front riser motor attachment screws (2).
4. Remove the front riser motor.

INSTALLATION




1. Position the front riser motor so that the notch (3) is aligned as shown.
2. Install the front riser motor attachment screws (2). Tighten the motor screws to 4 N.m (35 in. lbs.).
3. Connect the front riser motor harness connector.
4. Install the front seat.
5. Connect the negative battery cable.