Glove Box

REMOVAL




1. Remove the side air nozzle.
2. Remove the lower instrument panel (1).
3. Open the glove compartment.




4. Remove the cover at the top of the glove compartment opening (2).
5. Remove the glove compartment lamp (1) and disconnect the electrical connection.




6. Remove the screws (1, 2, 4, and 5) around the opening and the screw (3) on the side of the instrument panel.
7. Remove the glove compartment from the vehicle.

INSTALLATION

NOTE: When installing the air duct, check the clips and exposed electrical connections for the glove compartment illumination and route through the opening.




1. Install glove compartment.
2. Install the screws (1, 2, 4 and 5) around the opening.




3. Connect the glove compartment lamp electrical connector and install.
4. Install the cover (2) at the top of the glove compartment opening.




5. Install the lower instrument panel (3).
6. Install the side air nozzle.