Air Temperature Sensor ( Ambient / Intake ): Service and Repair

REMOVAL




1. Disconnect the negative battery cable.
2. Remove the engine cover (1). Grasp both corners of the engine cover, and pull up firmly.




3. Remove the upper air cleaner housing.
4. Disconnect the intake air temperature sensor (1) harness connector.




5. Remove the intake air temperature sensor (1).


INSTALLATION




1. Install the intake air temperature sensor (1).
2. Connect the intake air temperature sensor harness connector.




3. Install the upper air cleaner housing.
4. Install the engine cover. Align the engine cover retaining clips to the rubber mounts, and push down firmly to connect engine cover to rubber mounts.

NOTE: To ease the installation of the engine cover, apply a small amount of lubricant to the engine cover rubber mounts.

5. Connect the negative battery cable.