Power Seat Switch: Service and Repair

REMOVAL




1. Remove the front seat.
2. Remove the bolt (1) attaching the side panel to the seat base.




3. Push the side panel with the switches forward and downward to remove.




4. Disconnect the power seat switch harness connectors (1) and (2).
5. Separate the cable straps and expose the wiring harness.
6. Remove the side panel with switches from the seat base.

INSTALLATION

NOTE: Insure the harness is routed and secured in its original position to avoid potential interference with moving parts.




1. Install the power seat switch wiring harness in its original location.
2. Connect the power seat switch harness connectors (1) and (2).




3. Position the side panel with the switches as one part on the seat base, then install the side panel attaching screw (1).
4. Install the front seat.
5. Connect the negative battery cable.