Rearview Mirror

REMOVAL




1. Disconnect the negative battery cable.
2. Insert a 5 mm metal dowel into the hole on the windshield side of the mirror base.
3. Rotate the mirror base approximately 90 degrees to the left or right.
4. Remove the courtesy lamp.
5. Disconnect the mirror harness connector.
6. Feed the harness connector and harness past the opening in the headliner and remove the mirror assembly.

INSTALLATION




1. Feed the mirror harness connector into the headliner and connect.
2. Install the courtesy lamp.
3. Position the mirror base over the mounting plate so that it is flush with the windshield surface.




4. Rotate the mirror base approximately 90 degrees until the hole is positioned downward.
5. Connect the negative battery cable.