Intermediate Shaft, M/T

Blocker Ring Wear Gap
1st Gear 0.66 - 1.84 mm (0.026 - 0.072 in.)
2nd Gear 0.66 - 1.84 mm (0.026 - 0.072 in.)
5th Gear 0.86 - 1.54 mm (0.034 - 0.061 in.)
Reverse 0.77 - 1.63 mm (0.030 - 0.064 in.)

Gear End Play
1st Gear 0.091 - 0.828 mm (0.004 - 0.033 in.)
2nd Gear 0.051 - 0.787 mm (0.002 - 0.031 in.)
5th Gear 0.102 - 0.762 mm (0.004 - 0.030 in.)
Reverse 0.066 - 0.805 mm (0.003 - 0.0317 in.)