Input Shaft, M/T

Blocker Ring Wear Gap
3rd Gear 0.856 - 1.539 mm (0.0338 - 0.0606 in.)
4th Gear 0.762 - 1.631 mm (0.030 - 0.064 in.)

Gear End Play
3rd Gear 0.099 - 0.505 mm (0.004 - 0.020 in.)
4th Gear 0.048 - 0.457 mm (0.002 - 0.018 in. )

5th Gear-to-Input Shaft Nut 200 Nm (148 ft. lbs.)