Computers and Control Systems: Tools and Equipment

REQUIRED TOOLS AND EQUIPMENT
DRBIII(R) (diagnostic read-out box) scan tool
Evaporative System Diagnostic Kit # 6917
fuel filler adapter # 8382
fuel pressure adapter (C-6631) or #6539
fuel pressure kit (C-4799-B) or # 5069
fuel release hose (C-4799-1)
Min Air flow fitting # 6714
Pinout Box (Miller # 8815)
jumper wires
ohmmeter
oscilloscope
vacuum gauge
voltmeter
12 volt test light minimum 25 ohms resistance with probe #6801

CAUTION: A 12 volt test light should not be used for the following Circuits, damage to the powertrain controller will occur.
- 5 Volt Supply
- 8 Volt Supply
- J1850 PCI Bus
- CCD Bus
- CKP Sensor Signal
- CMP Sensor Signal
- Vehicle Speed Sensor Signal
- O2 Sensor Signal