Vacuum Fluorescent Display

REMOVAL
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove instrument cluster from vehicle.
3. Remove six cluster back cover retaining screws and remove the cover.
4. Carefully unplug the connector from printed circuit board.
5. Remove six attachment screws and then remove cluster mask/lens from the instrument cluster.
6. Carefully pull the dial assembly from the housing to separate connection with the PC-board.
7. Remove two screws from the back of the dial assembly to remove the VF-display.
8. Remove the VF-display from the cluster.

INSTALLATION
1. Position the VF-display onto the dial assembly and install the two screws.
2. Carefully push the dial assembly into the housing to make the connection with the PC-board.
3. Install the six attachment screws and then install cluster mask/lens to the instrument cluster.
4. Carefully plug the connector into the printed circuit board.
5. Install the cover and the six cluster back cover retaining screws.
6. Install the instrument cluster into vehicle.
7. Connect the negative battery cable remote terminal to the remote battery post.