Oil Pressure Regulator Valve: Service and Repair

OIL PRESSURE RELIEF VALVE

REMOVAL
1. Remove the oil pan.
2. Remove the pressure relief valve by remove the threaded retaining cap from the oil pump housing.





CAUTION: Oil pump pressure relief valve must be installed as shown in (Fig. 93) or engine damage may occur.

3. Remove spring and relief valve (Fig. 93).

INSTALLATION
1. Lubricate relief valve with oil.

CAUTION: The pressure relief valve must be installed as shown in (Fig. 93), or engine damage may occur.

2. Install relief valve, spring and retainer cap (Fig. 93). Tighten cap to 12 Nm (105 in. lbs.).
3. Install the oil pan.