Cylinder Head Assembly: Specifications
Cylinder HeadGasket Thickness (Compressed) 1.50 ± 0.05 mm (0.0591 ± 0.002 in.)
Valve Seat Angle 45° - 45.5°
Valve Seat Runout (Max.) 0.05 mm (0.002 in.)
Intake Valve Seat Width 1.00 - 1.5 mm (0.0394 - 0.0591 in.)
Exhaust Valve Seat Width 1.25 - 1.75 mm (0.0492 - 0.0689 in.)
Guide Bore Diameter (Std.) 5.975 - 6.00 mm (0.2353 - 0.2363 in.)
Valve Guide Height *
Intake 13.25 - 13.75 mm (0.5217 - 0.5414 in.)
Exhaust 13.25 - 13.75 mm (0.5217 - 0.5414 in.)
Camshaft Sprocket Bolts 28 Nm (250 in. lbs.)
* Measured from cylinder head surface to top of guide.
For specifications regarding Cylinder Head bolts, refer to service procedure.
For specifications regarding Intake Manifold bolts, refer to service procedure.
For specifications regarding Camshaft Bearing Cap bolts, refer to service procedure.
For specifications regarding Exhaust Manifold bolts, refer to service procedure.