Lifter / Lash Adjuster: Service and Repair

HYDRAULIC LASH ADJUSTERS

REMOVAL
1. Remove cylinder head cover(s).
2. Remove rocker arm(s).

CAUTION: If lash adjusters and rocker arms are to be reused, always mark position for reassembly in their original positions.

3. Remove lash adjuster(s).

INSTALLATION
1. Install hydraulic lash adjuster making sure adjusters are at least partially full of oil. This can be verified by little or no plunger travel when lash adjuster is depressed.
2. Install rocker arm(s) and cylinder head covers.