Side View Mirror Flag / Door Glass Channel
SIDE VIEW MIRROR FLAG / DOOR GLASS CHANNELREMOVAL
1. Remove side view mirror.
2. Partially lower the door glass.
3. Remove inner belt line glass seal.
Fig. 28:
4. Remove attaching fasteners (Fig. 28).
5. Remove the adjustment stud. Count the number of turns to aid installation.
6. Remove mirror flag.
INSTALLATION
1. Align glass into the guide and position the mirror flag on door. (Fig. 28).
2. Install the adjustment stud and tighten the number of turns counted in the removal procedure.
3. Install attaching fasteners and tighten to 7 N.m (62 in.lbs.).
4. Install the inner glass seal.
Fig. 13:
5. Verify glass fit at mirror flag. Upper edge of the glass should be flush with the mirror flag top edge. Adjust the mirror flag position as necessary. (Fig. 13).
6. Install side view mirror.