Power Seat Control Module: Service and Repair

HEATED SEAT MODULE

REMOVAL
1. Move the appropriate power seat track to its uppermost and rearward-most stop position.
2. Disconnect and isolate the negative battery cable.

Heated Seat Module:

3. Reach under the front of the seat cushion and separate the heated seat module from the seat cushion frame.
4. Disconnect the wire harness connector from the connector receptacle on the back of the heated seat module.
5. Remove the heated seat module from the vehicle.

INSTALLATION
1. Position the heated seat module under the seat.
2. Connect the wire harness connector on the back of the heated seat module.
3. Reposition the drivers power seat track.
4. Connect the negative battery cable.