Cylinder Head Assembly: Specifications

Cylinder Head
Material Cast Aluminum
Gasket Thickness (Compressed) 0.71 mm (0.028 in.)
Camshaft Bearing Bore Diameter
Journals No. 1 - 6 26.020 - 26.041 mm (1.024 - 1.025 in.)

For specifications regarding Cylinder Head bolts, refer to service procedure. Service and Repair

For specifications regarding Intake Manifold bolts, refer to service procedure. Service and Repair

For specifications regarding Camshaft Bearing Cap bolts, refer to service procedure. Procedures

For specifications regarding Exhaust Manifold bolts, refer to service procedure.