Coolant Reservoir: Service and Repair

COOLANT RECOVERY

CONTAINER 2.0L/2.4L

REMOVAL
1. Remove the power steering reservoir attaching screw.
2. Remove the air conditioning receiver/dryer attaching screw.
3. Unsnap the washer hose from the coolant recovery container.
4. Disconnect the overflow hose from coolant outlet connector.
5. Remove coolant recovery container screws.
6. Remove coolant recovery container.

INSTALLATION
1. Install container in mounting position and install attaching screws.
2. Connect the overflow hose to the coolant outlet connector.
3. Snap the washer hose into groove on coolant recovery container.
4. Install the air conditioning receiver/dryer attaching screw.
5. Install the power steering reservoir attaching screw.
6. Fill cooling system.