Remove Magnet From Spare

REMOVE MAGNET FROM SPARE (5-TIRE TPM SYSTEM ONLY)
A magnet is used to initiate a sensor ID transmission. In the EVIC training procedure, the spare wheel is the last in the sequence. If the magnet is left on the wheel, the sensor/transmitter will continue its ID transmission. If the EVIC detects 20 transmissions from the spare wheel in 60 seconds and the vehicle speed is above 40 km/h (25 mph), it will:
- request a chime.
- display "REMOVE MAGNET FROM SPARE" for 60 seconds per ignition-ON cycle.