Rear Window Antenna Replacement

REMOVAL

WARNING: DO NOT OPERATE THE VEHICLE WITHIN 24 HOURS OF REAR WINDOW GLASS INSTALLATION. IT TAKES AT LEAST 24 HOURS FOR URETHANE ADHESIVE TO CURE. IF IT IS NOT CURED, THE REAR WINDOW GLASS MAY NOT PERFORM PROPERLY IN AN ACCIDENT. BE SURE TO REFER TO THE URETHANE MANUFACTURER'S DIRECTIONS FOR CURING TIME SPECIFICATIONS, AND DO NOT USE ADHESIVE AFTER ITS EXPIRATION DATE.

CAUTION: Open the left front door glass before installing the rear window to avoid pressurizing the passenger compartment if a door is slammed before the urethane bonding is fully cured. Water leaks can result

1. Remove upper quarter trim panel.
2. Disconnect the wire connectors from rear window defogger, and rear window mounted radio antenna, if so equipped.
3. Remove rear window.

INSTALLATION
1. Install rear window.
2. Connect rear window defogger wiring connector, and rear window mounted radio antenna connector.
3. Install upper quarter trim panel.