Inspection Procedure 10: Oil Leakage From Hose Connection

INSPECTION PROCEDURE 10: Oil Leakage from Hose Connection

DIAGNOSIS

STEP 1. Check for loosening of the flare nut.
Q: Is the flare nut loose?
YES: Tighten it to the specified torque. Then go to Step 3.
NO: Go to Step 2.

STEP 2. Check the insertion of the hose and the clamp installation state.
Q: Are they correct?
YES: Go to Step 3.
NO: Repair or replace the part. Then go to Step 3.

STEP 3. Check symptoms. Check that no oil is leaking.
Q: Is there oil leakage?
YES: Repeat to Step 1.
NO: Diagnosis is complete.