System Specifications

FASTENER TIGHTENING SPECIFICATIONS

Emission Control System
EGR valve bolt
<2.4L ENGINE> 19 ± 3 Nm (14 ± 2 ft. lbs.)
<3.0L ENGINE> 22 ± 4 Nm (16 ± 3 ft. lbs.)

Catalytic Converter
Exhaust fitting stay (LH)
M8 12 ± 2 Nm (107 ± 17 in. lbs.)
M12 32 ± 7 Nm (24 ± 5 ft. lbs.)
Exhaust fitting stay (RH)
M8 12 ± 2 Nm (107 ± 17 in. lbs.)
M12 32 ± 7 Nm (24 ± 5 ft. lbs.)

Front catalytic converter nut
(LH) 35 ± 4 Nm (26 ± 3 ft. lbs.)
(RH) 35 ± 4 Nm (26 ± 3 ft. lbs.)
Front exhaust pipe nut
<2.4L ENGINE> 49 ± 10 Nm (37 ± 7 ft. lbs.)
<3.0L ENGINE> 49 ± 9 Nm (37 ± 6 ft. lbs.)
Hanger bolt 12 ±2 Nm (107 ± 17 in. lbs.)
Heated oxygen sensor (rear) 54 ± 5 Nm (40 ± 4ft. lbs.)
Left bank heated oxygen sensor (rear) 54 ± 5 Nm (40 ± 4 ft. lbs.)
Right bank heated oxygen sensor
(front) 54 ± 5 Nm (40 ± 4 ft. lbs.)
(rear) 54 ± 5 Nm (40 ± 4 ft. lbs.)