System Specifications

FASTENER TIGHTENING SPECIFICATIONS

ITEM SPECIFICATION

Fuel pressure regulator 8.8 ± 1.0 Nm (78 ± 9 in. lbs.)
Fuel rail mounting bolt 12 ± 1 Nm (100 ± 13 in. lbs.)
High-pressure fuel hose 4.9 ± 1.0 Nm (44 ± 8 in. lbs.)
Idle air control motor 2.0 ± 0.5 Nm (18 ± 4 in. lbs.)
Lever assembly 4.9 ± 1 Nm (43 ± 9 in. lbs.)
Throttle body bracket M6 4.9 ± 1 Nm (43 ± 9 in. lbs.)
Throttle body bracket M8 6.9 ± 1.5 Nm (61 ± 13 in. lbs.)
Throttle body mounting bolt 19 ± 3 Nm (14 ± 2ft. lbs.)
Throttle position sensor 2.0 ± 0.5 Nm (18 ± 4 in. lbs.)
Throttle speed adjusting screw mounting nut 2.0 ±0.5 Nm (18 ± 4 in. lbs.)

FUEL SUPPLY

ITEM SPECIFICATION

Engine control
Accelerator pedal bracket installation nut 12 ± 2 Nm (100 ± 22 in. lbs.)
Bracket nut 4.9 ± 1.0 Nm (44 ± 8 in. lbs.)

Fuel supply
Band assembly nut 26 ± 4 Nm (19 ± 3 ft. lbs.)
Cap 80 ± 10 Nm (59 ± 7 ft. lbs.)

SERVICE SPECIFICATIONS

ITEM STANDARD VALUE
Accelerator cable free play 1.0 - 2.0 mm (0.04 - 0.08 in.)