Inspection Procedure 1

INSPECTION PROCEDURE 1: Throttle Valve will not Fully Open or Close

DIAGNOSIS

STEP 1. Check the accelerator cable adjustment.

Q: Is the accelerator cable properly adjusted?
YES: Go to Step 2.
NO: Adjust the accelerator cable. Then go to Step 4.

STEP 2. Check the return spring.

Q: Is the return spring damaged or deformed?
YES: Go to Step 3.
NO: Replace, then go to Step 4.

STEP 3. Check the throttle lever.

Q: Is the throttle lever damaged or deformed?
YES: Replace, then go to Step 4.
NO: There is no action to be taken.

STEP 4. Check symptom.

Q: Does the throttle valve fully open and close?
YES: The procedure is complete.
NO: Return to Step 1.