Programming and Relearning

ENABLING/DISABLING THE ROLLING LOCK FUNCTION
Turning the rolling lock function ON and OFF

The rolling lock function can be turned on and off by the following operations:
1. Set the vehicle to the following condition:
- Insert key into ignition key cylinder and set the ignition switch to the LOCK (OFF) position.
- Set all the door closed.
2. Set and keep center door lock switch to the side LOCK for about 10 seconds to switch the rolling lock function ON/ OFF. At this time, ETACS-ECU makes buzzer sound. (If switched ON, buzzer sounds once. If switched OFF, buzzer sounds twice.)