DTC 92

Side Impact Sensor (LH) System for Fault 1

DTC SET CONDITIONS
These DTC are set if the followings are detected from the analog G-sensor inside the side impact sensor output.
- Analog G-sensor is not operating.
- Analog G-sensor characteristics are abnormal.
- Analog G-sensor inside the side impact sensor output is abnormal.

TROUBLESHOOTING HINTS
- Malfunction of the side impact sensor (LH) (for DTC 92)
- Malfunction of the side impact sensor (RH) (for DTC 95)

DIAGNOSIS

Required Special Tool:
- MB991502: Scan Tool (MUT-II)
Replace the side impact sensor (LH) (for DTC 92) and the side impact sensor (RH) (for DTC 95).

Q: Is any of DTC 92 or 95 set?

YES: Replace the SRS-ECU.
NO: The procedure is complete.